How to Attach Dragan Toe Hooks to a Streetboard?

So you've got your new Ready to Cruise Streetboard set up, or taken to switch that 90's Snakeboard to the Dragan Cruiser and want to attach the Toe Hooks?  Well here we will go through the simple steps needed to set them up. 

 

1. Positioning

First of all, make sure you are wearing the shoes that you will be wearing when you are going to be riding.  Place your Streetboard on the ground and put your foot on in your normal riding position.  Then take the Dragan Toe Hook and position it flat to the outside of your shoe.  Take note of the closest holes that line up with it. 

2. Adding the Bolts

Once you have this, pop the bolts through from the underside, with the bolts sticking upwards through the toe hooks.  Add the washer and nuts, but do not tighten completely. 

3. Finalising the position

Finally put your foot back on the Streetboard, and move the Toe Hooks back and forth until you feel comfortable.  Then all you have to do is tighten up the bolts, and you're good to go!


Older Post Newer Post